thermal printer image

Scroll Down and click on Continue button for destination

Congrats! Link is Generated

thermal printer image on GoojDex

A simple utility for generating 1-bit data arrays formatted for use with Arduino sketches for thermal printers.

Source: or

Drawing: width: px (2 bytes), height: px.

Scale: Width: px (48 bytes).

Mode:

Threshold:

Noise:

Brightness:

Contrast:

Printer Output Preview:

Variable Name:   change the variable name if you wish to embed more than one image in a sketch.

replace image.h With This:

// Put this near the top of your sketch: // 16 x 16 (2 bytes wide) const uint16_t IMAGE_HEIGHT = 16; const uint16_t IMAGE_WIDTH = 2; const byte PROGMEM IMAGE[] = { 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, };

Powered by Dev Solutions

Clicking on the Continue button will redirect you to the Google search page. Click our site, goojdex.blogspot.com, from the first search result to get your link.